Welder / Steel Fabricator
AI summary
Surveillant Fire Ltd is hiring a Welder / Steel Fabricator in Lagos, Nigeria. The role involves welding, cutting, fabrication, and installation of steel components and fire protection pipework to approved drawings and safety standards. Salary is NGN 150,000 - 250,000 plus commission, full-time.
- Full-time role in Lagos with salary NGN 150,000 - 250,000 plus commission
- Requires SSCE, 3 years experience, and English proficiency
- Mid-level welding and fabrication role in construction/fire protection
- Applicants should be based in Lagos, Nigeria
AI job guide
Use this guide to check salary signals, requirements, documents, application steps and safety before you apply.
AI salary guide
Source salary availableThe source lists NGN 150,000 - 250,000 Negotiable Plus Commission. Confirm the final pay, benefits, contract terms and allowances directly with the employer before accepting an offer.
Can you qualify for this role?
- Required3+ years of relevant experienceThe job post includes a minimum experience signal.
- PreferredPractical evidence in cleaning, Welder, Steel FabricatorThe tags and summary point to skills connected with this role.
- RequiredAvailability to work in LagosThe vacancy is associated with this location.
- UnclearComfort with the Full Time contract termsConfirm hours, duration, probation and benefits at the original source.
Documents to prepare
- Likely requiredUpdated CV
- Role specificCover letter or short employer message
- OptionalProfessional references
- VerifyID or passport only after verifying the employer
Application tips for this job
- Place your strongest Welder / Steel Fabricator evidence in the first half of your CV.
- In your cover letter or employer message, connect your experience to Surveillant Fire Ltd and the role in Lagos.
- Add concrete examples related to cleaning, Welder, Steel Fabricator, ideally with measurable outcomes or clear responsibilities.
- Follow the instructions from Jobberman Nigeria; avoid sending documents to unofficial contacts or copied links.
- Confirm the deadline, interview location and employer contact before sharing personal documents.
Source and safety check
- Jobberman Nigeria
- Original source link available
- Application method is clear
- Deadline not specified
- No major risk signal was detected in the captured text.
Never pay for interviews, shortlisting, medical checks, uniforms, or job placement. Confirm every application at the original source before sharing personal documents. Report suspicious listing.
Interview preparation
- What experience makes you a strong fit for this Welder / Steel Fabricator role in cleaning, Welder?
- How have you handled responsibilities similar to those in this job post?
- Are you available to work in Lagos under the listed contract or schedule?
- Prepare examples with clear responsibilities, tools used and measurable outcomes.
- Review the source and research Surveillant Fire Ltd before the interview.
Ask what the first priorities will be in the role and how success will be measured.
Similar jobs to consider
Use AI to apply better
After confirming the original source, use Career Assistant to check role fit, tailor your CV and prepare a cover letter or employer message.
Original source description
Welder / Steel Fabricator Surveillant Fire Ltd Engineering & Technology Today Easy apply New Nigeria Full Time Construction NGN 150,000 - 250,000 Negotiable Plus Commission Share link Share on WhatsApp Share on LinkedIn Share on Facebook Share on Twitter Share via SMS Job summary The Welder / Steel Fabricator is responsible for carrying out welding, cutting, fabrication, assembly, and installation of steel components and fire protection system pipework in accordance with approved drawings, specifications, project requirements, quality standards, and safety procedures. Min Qualification: High School (S.S.C.E) Experience: Level: Mid level Experience: Length: 3 years Language Requirement: English Working Hours: Full Time - 8 to 5 Applicant Location: Lagos, Nigeria Job descriptions & requirements: Responsibilities: Report to the assigned work area on time. Inspect tools and equipment before use. Confirm availability of required materials. Complete assigned fabrication and welding activities. Monitor the quality of completed work. Minimize material wastage. Maintain a clean and safe work area. Report progress, challenges, and material requirements: to the Mechanical Supervisor. Welding & Fabrication: Carry out welding and fabrication works on fire protection pipework, steel supports, brackets, frames, and other structural components as required. Perform welding using appropriate processes, including SMAW/arc welding and other applicable welding methods. Cut, fit, align, tack, and weld pipes and steel components according to approved drawings and specifications. Fabricate pipe supports, brackets, base frames, sleeves, clamps, and other steel components required for project execution. Ensure accurate measurements, dimensions, alignment, and levels before and during fabrication. Perform grinding, finishing, and dressing of completed welds where required. Drawing & Technical Interpretation: Read and interpret engineering drawings, fabrication drawings, dimensions, welding symbols, and installation details. Work from approved drawings and instructions provided by the Mechanical Supervisor or Project Engineer. Identify discrepancies or unclear details in drawings and seek clarification before commencing affected work. Ensure fabricated components correspond with the approved design and site requirements. Fire Protection Installation Support: Support the installation of sprinkler, hydrant, hose reel, fire suppression, and associated mechanical piping systems. Carry out pipe fabrication and welding in accordance with the approved installation methodology. Assist with pipe alignment, positioning, supports, and installation. Ensure welded joints and fabricated components are suitable for subsequent inspection and testing. Material Management: Use welding materials, pipes, electrodes, steel sections, fittings, and other consumables responsibly. Minimize material wastage during cutting and fabrication. Account for materials received for assigned work. Report material shortages, damaged materials, or unsuitable materials to the Mechanical Supervisor. Return unused or reusable materials to the designated storage area. Maintain proper cleaning around fabrication and work areas. Quality Control: Ensure all welding and fabrication works meet approved project specifications and required quality standards. Inspect completed welds for visible defects, including cracks, porosity, undercut, poor penetration, and incomplete fusion. Correct defective welds promptly when instructed. Ensure proper fit-up and alignment before final welding. Cooperate with Project Engineers and QA/QC personnel during inspections and testing. Avoid unauthorized modifications to approved designs. Health, Safety & Environmental: Comply strictly with company HSE policies and site safety procedures. Use appropriate PPE at all times, including a welding helmet, gloves, safety boots, protective clothing, and eye protection. Obtain and comply with applicable Hot Work Permit requirements: before commencing welding activities. Ensure appropriate fire prevention measures and fire watch arrangements are in place during hot work. Inspect welding machines, cables, gas cylinders, regulators, hoses, and other equipment before use. Maintain a safe distance from combustible materials and other hazardous operations. Report unsafe conditions, incidents, near misses, and defective equipment immediately. Tools & Equipment Management: Operate welding machines, grinders, cutting machines, drilling machines, and other fabrication equipment safely and correctly. Conduct basic pre-use inspections of tools and equipment. Report faulty or damaged equipment immediately. Ensure tools and equipment are properly stored after use. Prevent unauthorized use or misuse of company tools and equipment. Teamwork & Site Coordination: Work closely with Mechanical Supervisors, Pipe Fitters, Engineers, Electricians, and other project personnel. Follow daily work instructions and meet agreed production targets. Assist less-experienced welders and fabricators where required. Maintain professional conduct and good working relationships with colleagues and subcontractors. Testing & Inspection Support: Support pressure testing and other inspection activities where required. Rectify welding or fabrication defects identified during inspection. Ensure fabricated pipe sections and components are ready for inspection before installation or testing. Cooperate with inspectors, engineers, and client representatives during quality inspections. Requirements: Minimum qualification of an SSCE 3 years of previous experience: in a similar role Log In and Apply Important safety tips Do not make any payment without confirming with the Jobberman Customer Support Team. If you think this advert is not genuine, please report it via the Report Job link below. Report Job