Instrumentation and Control Technician
AI summary
Ereyi Ventures Nigeria Limited, an indigenous EPCL contractor serving Nigeria's oil and gas industry, is recruiting Instrumentation and Control Technicians (2 openings, Ref: ICT-03) for an Automated Crude Oil Storage Tanks Upgrade project at an offshore terminal in Delta State. The role covers installing, calibrating, testing and troubleshooting field instrumentation and control interfaces for safe crude-oil tank operations.
- 2 openings for an offshore crude oil storage tank upgrade project in Delta State (Ref: ICT-03)
- Install, terminate, calibrate and loop-check level, pressure, temperature and flow instruments
- Troubleshoot instrument loops and intrinsically safe (IS) barrier circuits during commissioning
- Hook up radar tank gauges, servo gauges and overfill prevention switches per approved drawings
- Strict compliance with hazardous area work permits and gas testing requirements
AI job guide
Use this guide to check salary signals, requirements, documents, application steps and safety before you apply.
AI salary guide
Not enough public dataNot enough public salary data is available for this exact role. Before applying, prepare to ask about gross pay, benefits, contract length, probation period, transport and any allowances.
Can you qualify for this role?
- UnclearRelated work experienceThe text mentions experience, but the exact level should be confirmed at source.
- RequiredEducation or certification mentioned in the postThe captured text mentions education, a diploma, certificate, or licence.
- PreferredPractical evidence in security, internship, segurancaThe tags and summary point to skills connected with this role.
- RequiredAvailability to work in Not specifiedThe vacancy is associated with this location.
Documents to prepare
- Likely requiredUpdated CV
- Role specificCover letter or short employer message
- OptionalProfessional references
- Role specificAcademic or professional certificates
- VerifyID or passport only after verifying the employer
Application tips for this job
- Place your strongest Instrumentation and Control Technician evidence in the first half of your CV.
- In your cover letter or employer message, connect your experience to Ereyi Ventures Nigeria Limited and the role in Not specified.
- Add concrete examples related to security, internship, seguranca, ideally with measurable outcomes or clear responsibilities.
- Follow the instructions from Jobzilla Nigeria; avoid sending documents to unofficial contacts or copied links.
- Confirm the deadline, interview location and employer contact before sharing personal documents.
- Prepare a polite question about pay, benefits and contract terms for later interview stages.
Source and safety check
- Jobzilla Nigeria
- Original source link available
- Application method is clear
- Deadline not specified
- No major risk signal was detected in the captured text.
Never pay for interviews, shortlisting, medical checks, uniforms, or job placement. Confirm every application at the original source before sharing personal documents. Report suspicious listing.
Interview preparation
- What experience makes you a strong fit for this Instrumentation and Control Technician role in security, internship?
- How have you handled responsibilities similar to those in this job post?
- Are you available to work in Not specified under the listed contract or schedule?
- Prepare examples with clear responsibilities, tools used and measurable outcomes.
- Review the source and research Ereyi Ventures Nigeria Limited before the interview.
Ask what the first priorities will be in the role and how success will be measured.
Similar jobs to consider
Use AI to apply better
After confirming the original source, use Career Assistant to check role fit, tailor your CV and prepare a cover letter or employer message.
Original source description
Job Title: Instrumentation and Control Technician
Instrumentation and Control Technician at Ereyi Ventures Nigeria Limited - 2 Openings
⏲
Sep 23, 2026, 6:11 AM
⋕
View all Engineering jobs
Ereyi Ventures Nigeria Limited is an indigenous Engineering, Procurement, Construction, and Logistics (EPCL) contractor providing integrated technical services to the Nigerian oil and gas industry. The company brings a multidisciplinary team of engineering, inspection, and construction professionals to deliver brownfield and greenfield projects across onshore and offshore facilities, with a focus on asset integrity, tank and vessel upgrades, mechanical and instrumentation works, and terminal automation. Leveraging local content expertise alongside international codes and standards (API, ASME, NACE/AMPP, and IEC), Ereyi Ventures is positioned to execute the Automated Crude Oil Storage Tanks Upgrade and Repair Services at an offshore terminal, combining indigenous capacity with the technical rigor required for safety-critical hydrocarbon storage infrastructure.
We are recruiting to fill the position below:
Reference no: ICT-03
Location: Offshore, Delta
Role Objective
Install, calibrate, test and troubleshoot field instrumentation and control interfaces supporting safe and reliable crude-oil tank operation.
Core Roles and
Responsibilities
- Perform functional testing of instrument loops, including simulation of process values and verification of alarm/trip set-points against approved Cause & Effect documentation.
- Support fault-finding and troubleshooting on instrumentation and control circuits during commissioning, including intrinsically safe (IS) barrier circuits.
- Terminate and test junction boxes, marshalling cabinets, and multicore cable runs between field instruments and the control system.
- Maintain accurate red-line markups of instrument drawings and update as-built documentation daily.
- Install, terminate, calibrate, and loop-check field instrumentation (level, pressure, temperature, flow) associated with crude oil storage tank upgrades.
- Strictly comply with hazardous area work permits, hot/cold work procedures, and gas testing
Requirements
- prior to any instrument installation activity.
- Carry out installation and hook-up of radar tank gauges, servo gauges, temperature multi-element sensors, and overfill prevention switches per approved isometrics and hook-up drawings.
- Assist Instrumentation & Control Engineer in FAT/SAT witnessing and punch-list closure.
- Qualifications and
- Must pass a hands-on practical assessment (live loop-check simulation) during the interview process; theoretical knowledge alone will not suffice.
- Valid BOSIET/HUET, offshore medical fitness certificate, and full physical fitness to work at height and in confined spaces (independently verified via a fit-to-work medical, not self-declared).
- Higher National Diploma (HND) or B.Eng. in Electrical/Electronic or Instrumentation Engineering — Ordinary National Diploma (OND) holders will only be considered with a minimum of ten (10) years verifiable hands-on
- are set accordingly high.
- Six (6) years’ hands-on field instrumentation
- Candidates must demonstrate recent
- does not guarantee shortlisting.
- Employment basis
- Project-based engagement. Rotation, mobilisation date, contract duration and commercial terms will be communicated to shortlisted candidates.
- Recruitment and Compliance Notice
- No candidate may perform work outside the limits of his or her verified competence or certification authority.
- The employer reserves the right to conduct written, oral, practical and scenario-based assessments and to withdraw an offer where information is inaccurate, incomplete or cannot be verified.
- Applicants must use the position title and reference number as the email or portal submission subject.
- Application instructions and the closing date will be stated in the publication notice.
- Reasonable accommodation may be provided during the selection process where requested and practicable, without reducing the essential safety and technical
- of the role.
- Applications will be considered on merit and role-related competence.
- The successful candidates will be required to comply with project HSE rules, quality plans, information-security controls, anti-bribery requirements, confidentiality obligations and all lawful site instructions.
- All appointments are subject to verification of identity, qualifications, employment history, professional standing, medical fitness, offshore survival status, references and client-specific competence requirements.
- View all Jobs in Nigeria
- Delta State
- Instrumentation and Control Technician job vacancies in Nigeria
Experience
and must additionally hold a City & Guilds or equivalent internationally recognized trade certification.
Demonstrated proficiency with HART communicators, loop calibrators, and multifunction process calibrators, evidenced by a practical bench test to be administered at interview.
Technician-grade roles on this scope carry direct accountability for overfill-prevention functionality;
in oil & gas, with at least four (4) years specifically on tank gauging/overfill prevention systems on live crude storage facilities.
Minimum three (3) verifiable offshore tours of duty on tank farm, terminal, or FPSO topsides instrumentation work — inland/swamp-only
does not satisfy this requirement.
CompEx Ex01–Ex04 certification (hazardous area installation and inspection) is mandatory and must be current — expired certificates must be renewed prior to application submission.
Mandatory possession of a valid Instrument Fitter/Technician trade certification from a recognized body (e.g., NABTEB, City & Guilds, or international equivalent) — no informally acquired ('on-the-job only') competency will be accepted without formal certification.
Mandatory
on comparable oil and gas projects.
Generic construction
without direct tank, terminal, refinery, process-plant or offshore exposure will not be accepted.
Expired, unverifiable or attendance-only certificates will not satisfy a mandatory requirement.
Candidates must be able to interpret engineering drawings, specifications, inspection and test plans, permits, risk assessments and applicable codes, and must produce clear technical reports in English.
Any offer remains conditional upon medical fitness, background checks and client approval.
Candidates must demonstrate strong process-safety awareness, stop-work discipline, quality ownership and effective collaboration in a live brownfield environment.
Applicants must be available for technical interviews, certification checks and practical or scenario-based assessment at short notice.
Qualifications and professional certifications must be issued by recognised bodies, current where applicable, and independently verifiable.
All offshore survival, medical and safety credentials specified for the role must be valid before mobilisation.
How to Apply
Interested and qualified candidates should send their CV to:
ereyiventures@gmail.com
using the Job Title as the subject of the mail.
Application Package
Current availability and earliest mobilisation date.
Copies of academic qualifications, professional registrations and all mandatory certificates, including certificate numbers and expiry dates.
A detailed curriculum vitae stating the position title and reference number.
Evidence supporting role-specific
claims, such as redacted appointment letters, client approvals, signed reports, logbooks or completion certificates.
A project-
schedule covering at least three relevant assignments and stating client, facility, dates, scope, exact role, achievements and a contactable referee.
Important Note
Incomplete applications or applications that do not clearly demonstrate every mandatory criterion may be screened out without further correspondence.
Only shortlisted candidates will be contacted.
Selection standard
The criteria in this document are deliberately rigorous. Appointment is subject to documentary verification, certification-registry checks, a technical interview or practical assessment, client acceptance and fitness to mobilise. Meeting the minimum