Job Check Nigeria
Jobs in Nigeria
Back to jobs
Job in Nigeria

Transformer Specialist

IOTA Group Nigeria Type not specified Posted 2026-09-30
StateNigerCityNot specifiedContractType not specifiedPosted2026-09-30Close dateNot specifiedExperience7 yearsSourceJobzilla Nigeria
transformer specialistpower transformerhigh voltagesubstationcommissioningOMICRONNigeriaenergytechnical servicefull timeinternshipspecialist
Use AI for this job

AI summary

IOTA Group is hiring a Transformer Specialist to support the extension and upgrade of five high-voltage substations in Nigeria. The role involves supervising installation, testing, and commissioning of power transformers up to 330 MVA, using OMICRON equipment and ensuring compliance with HSE, QA/QC, and commissioning standards. Candidates need at least 7 years of relevant experience and OEM training certificates.

  • Technical service role focused on HV substation upgrade project in Nigeria
  • Supervise installation, testing, and commissioning of power transformers
  • Use OMICRON TESTRANO 600, CPC 100, and FRANEO 800 test equipment
  • Minimum 7 years of transformer installation and commissioning experience required
  • OEM training certificates and knowledge of IEC 60076 mandatory
  • Location may change based on project progress and needs

AI job guide

Use this guide to check salary signals, requirements, documents, application steps and safety before you apply.

AI salary guide

Not enough public data

Not enough public salary data is available for this exact role. Before applying, prepare to ask about gross pay, benefits, contract length, probation period, transport and any allowances.

Can you qualify for this role?

  • Required7+ years of relevant experienceThe job post includes a minimum experience signal.
  • PreferredPractical evidence in internship, specialist, technicalThe tags and summary point to skills connected with this role.
  • RequiredAvailability to work in Not specifiedThe vacancy is associated with this location.

Documents to prepare

  • Likely requiredUpdated CV
  • Role specificCover letter or short employer message
  • OptionalProfessional references
  • VerifyID or passport only after verifying the employer

Application tips for this job

  • Place your strongest Transformer Specialist evidence in the first half of your CV.
  • In your cover letter or employer message, connect your experience to IOTA Group and the role in Not specified.
  • Add concrete examples related to internship, specialist, technical, ideally with measurable outcomes or clear responsibilities.
  • Follow the instructions from Jobzilla Nigeria; avoid sending documents to unofficial contacts or copied links.
  • Confirm the deadline, interview location and employer contact before sharing personal documents.
  • Prepare a polite question about pay, benefits and contract terms for later interview stages.

Source and safety check

  • Jobzilla Nigeria
  • Original source link available
  • Application method is clear
  • Deadline not specified
  • No major risk signal was detected in the captured text.

Never pay for interviews, shortlisting, medical checks, uniforms, or job placement. Confirm every application at the original source before sharing personal documents. Report suspicious listing.

Interview preparation

  • What experience makes you a strong fit for this Transformer Specialist role in internship, specialist?
  • How have you handled responsibilities similar to those in this job post?
  • Are you available to work in Not specified under the listed contract or schedule?
  • Prepare examples with clear responsibilities, tools used and measurable outcomes.
  • Review the source and research IOTA Group before the interview.

Ask what the first priorities will be in the role and how success will be measured.

Use AI to apply better

After confirming the original source, use Career Assistant to check role fit, tailor your CV and prepare a cover letter or employer message.

Original source description

This technical service will be carried out in Nigeria.

This location could be changed according to the progress of the work and the project needs.

The aim is to extend and upgrade five existing high-voltage (HV) electrical substations as a turnkey project.

Main Goals

Ensure safe and compliant installation, testing and commissioning of power transformers.

Coordinate installation and commissioning interfaces with HV, P&C and Customer teams.

Deliver reliable and fully documented commissioned power transformers.

Support Ready for Commissioning (RFC) and Energization.

Represent Company Energy for installation, testing and commissioning of 330 MVA, 165 MVA and 60 MVA power transformers.

Deliverables

Approved installation, testing and commissioning procedures.

Supervise capacitance/tan delta tests using OMICRON CPC 100 with CP TD1, and SFRA tests using OMICRON FRANEO 800, where required.

Support SAT, customer inspections and energization activities.

Energy installation and commissioning standards

Engineering drawings and technical documentation.

Record test results and prepare commissioning reports and checklists.

Support final handover documentation and as-built records.

Supervise transformers turns ratio, winding resistance, vector group and OLTC tests using the OMICRON TESTRANO 600 or an equivalent from OMICRON.

Supervise transformer receipt inspections and verify installation readiness.

Verify insulation resistance, oil quality/DGA results, cooling systems, OLTC functions, alarms, protection and SCADA interfaces.

Identify defects, manage punch lists and support corrective actions.

Supervise transformer positioning and assembly of bushings, radiators, OLTC and accessories, including vacuum filling and oil filtration, in accordance with OEM instructions.

Review transformer installation, testing and commissioning procedures, drawings and vendor documentation.

Project specifications and contractual documentation.

Ensure compliance with Company’s Energy HSE, QA/QC and commissioning procedures.

Qualifications

  • Minimum 7 years of experience in power transformer installation, testing and commissioning.
  • Proven ability to operate OMICRON TESTRANO 600, with knowledge of CPC 100 with CP TD1 and FRANEO 800.
  • Knowledge of IEC 60076 and OEM procedures; relevant OEM training certificates mandatory.
  • English preferred.
  • Experience with 330 MVA, 165 MVA and 60 MVA power transformers, including oil handling and OLTC.
  • Additional Information:
  • Resident position.
  • Starting date: ASAP
  • Duration: 12 months
  • How to Apply
  • Interested and qualified candidates should:
  • Click here to apply online
  • View all Jobs in Nigeria
  • Anambra State
Source and provenanceSource: Jobzilla Nigeria. Last checked: 2026-09-30.Kazi Connect is a job discovery service, not the employer. Always confirm the vacancy at the original source.Summaries may be AI-assisted. Report inaccurate content.
Never pay to apply. Always confirm the original source and watch for payment requests, sensitive document requests, or unrealistic promises.